• thermacote_application

    BARRIÈRE THERMIQUE ISOLANTE

    UNE TECHNOLOGIE À 80% DE CÉRAMIQUE 

  • thermacote_tanker

    Économisez de l'énergie et des coûts de maintenance

    ThermaCote est la solution idéale pour isoler les vannes et tuyaux et tous autres équipements industriels tout en les protégeant de la corrosion.

  • maison_thermacote

    Réalisez jusqu’à 40% d’économie d’énergie

    Isolation, anti-humidité, embellit le bâtiment en une opération et sans perte de place.

  • Thermacote containers application

    ThermaCote est universel et léger

    Applicable et efficace sur tous supports.

Applicable et efficace sur tous supports, ThermaCote répond à tous les critères d’une bonne isolation : barrière thermique isolante, anti-humidité et l’étanchéité à l’air.

Le revêtement ThermaCote renforce l'isolation, régule l'humidité, embellit le bâtiment, en une opération et sans perte de place ! En englobant façades et toitures, ThermaCote régule la température des structures garantissant l’isolation et le confort en toute saison : été comme hiver. ThermaCote protège et extrait l’humidité pour assainir le bâtiment et préserver les matériaux.

  • maison1

    construction

    Façades et toitures des bâtiments, intérieur, extérieur, métal, béton, enduit, bois, briques, ardoises, tuiles, pierres, Placoplatre.

  • usine

    industriel

    Entrepôts, toiture d’usine, chaîne de production, conduit de vapeur, conduit de froid, système de climatisation, conteneur, silo, cuve, tuyau, vanne, réservoir de stockage, coffret technique, acier, aluminium.

  • maison2

    specifique

    CHAMBRES FROIDES, RÉSERVOIRS D'EAU, ROUTES, PISCINES, CAMIONS, VOITURES / VOITURES DE COURSE, AUTOBUS, CONTENEURS D'ALIMENTATION, VOITURES FERROVIAIRES, TAMBOURS DE CIMENT, PLASTIQUES, VERRES

Voulez-vous en savoir plus sur le produit

Nos clients

  • coca cola
  • habita for humanity
  • nestle
  • samsung
  • Shell

Études de cas

    • HVAC Ductwork after application of ThermaCote
    • HVAC Ductwork with ThermaCote 92 fahrenheit
    • HVAC Ductwork without ThermaCote 149 fahrenheit
    • HVAC Ductwork after application of ThermaCote
    Description :

    - Duct insulation was falling off as result of condensation moisture saturation

    - Portions of the duct were rusting from the moisture saturation

    - Several leaks were found in duct line

    - AHU internally was in need of cleaning

    The Solution brought by Thermacote :

    HR duct and AHU corrective efforts and ThermaCote. Prior to ThermaCote application, duct insulation was falling off as result of condensation moisture saturation, portions of the duct were rusting from the moisture saturation, several leaks were found in duct line, and AHU internally was in need of cleaning. Once ThermaCote was applied, condensation and corrosion was eliminated, and there was a 57⁰ difference in temperature measurement between the treated and untreated areas.

    •  boarding bridge after application  of thermacote
    •  boarding bridge after application of thermacote
    •  boarding bridge interior after thermacote application
    • boarding bridge interior after thermacote application
    Description :

    The boarding bridges are not directly air conditioned. Mounted under the bridge is an air handling unit, which provides pre-conditioned air to the aircraft while it is parked at the gate. During boarding and disembarking, air is exchanged between both the aircraft and the bridge, and the concourse and the bridge. As a result, conditioning the air in the bridges is inefficient and uncomfortable.

    The Solution brought by Thermacote :

    ThermaCote in reducing the heat load on passengers boarding bridges which was conducted at Hartsfield-Jackson Atlanta Airport from July 12 to August 15 2013. Passenger boarding bridges, air bridges, skyways and jet ways are not directly air conditioned. During boarding and disembarking, air is exchanged between both the aircraft and the bridge, and conditioning the air in the bridges is inefficient and uncomfortable. ThermaCote was applied to the boarding bridge, reducing heat gain, lowering interior temperature, and providing energy savings.

    • Temperatures in the bridge coated with ThermaCote was consistently at least 2-3°F (~1.5°C) lower than in the uncoated bridge. The temperature difference appears around 10am and lasts through the night.
    • The coated bridge was cooler at arrival, and continued to get cooler until departure. The coated bridge was consistently closer to human comfort levels.
    • The coating appeared to reduced heat gain by an average of 69.5 btu/h (0.02 kW).
    • The energy savings from the coated bridge were ~450 BTUs (.13kWh) a day. Those savings are split between the concourse and the preconditioned air handlers attached to the bridge.
    • Since the product works in part by reflecting solar radiation, the savings do not necessarily apply to cold weather.
    • Warehouse after application of ThermaCote
    • Warehouse after application of ThermaCote
    • Warehouse after application of ThermaCote
    • Warehouse after application of ThermaCote
    Description :

    No descritpion yet

    The Solution brought by Thermacote :

    No descritpion yet

Certifications

  • ISO Certification Logo
  • Green Chamber of the South Member Logo
  • U.S. Green Building Council Logo
  • Energy Star Rated Product Logo
  • Cool Roof Rated Product
  • Cool Roof Rating Council Member Logo
  • UL Product Certitification Logo
  • BBB Certification logo